The Network Manager view is available for the Modbus component. It lists all Modbus networks configured on the device's ports. The Network Manager view shows the statuses, ports (which the network is configured on), and enabled or disabled states of the network.
In the Modbus Network Manager, it is possible to:
add Modbus network component:
edit the Modbus network's name, interface and enable/disable the component:
Note: Editing is possible for more than one network at a time. If multiple networks are edited, the same new value is written to common slots, so individual slots, such as Name, cannot be edited in this manner.
copy/duplicate/remove Modbus network components:
The Modbus Network Manager view is accessible from the context menu of the Modbus component. It is also automatically opened if the Modbus component is double-clicked in the nav tree window.
The Device Manager view is available for the Modbus Network component. It lists all Modbus devices added to the network. The Device Manager view shows the names, statues, device names and ID, and enabled or disabled states of the device. The special Exts columns provides quick access to the Point Manager (with all points of the relevant device).
In the Modbus Manager, it is possible to:
add the Modbus Device component:
edit the Modbus device's name, device ID and enable/disable the component:
Note: Editing is possible for more than one device at a time. If multiple networks are edited, the same new value is written to common slots, so individual slots, such as Name, cannot be edited in this manner.
copy/duplicate/remove Modbus device components:
The Modbus Device Manager view is accessible from the context menu of the Modbus Network component. It is also automatically opened if the Modbus Network component is double-clicked in the nav tree window.
The Modbus Point Manager view is available for each device added to the Modbus network. It lists all Modbus points added to the Device component, and shows their Out slot value, status, object name and ID, polling mode, and enabled or disabled state.
In the Modbus Point Manager, it is possible to:
add the Modbus points:
edit the Modbus point's name, units, address and enable/disable the component:
Note: Editing is possible for more than one point at a time. If multiple points are edited, the same new value is written to common slots, so individual slots, such as Name, cannot be edited in this manner.
copy/duplicate/remove Modbus points:
The Modbus Point Manager view is accessible from the context menu of the Modbus Device component. It is also automatically opened if the Modbus Device component is double-clicked in the nav tree window.
Copyright ©2025 iSMA CONTROLLI. All rights reserved.