Installed applications (stations) table

Installed applications (stations) table

The top area of the Application Director shows a table of installed applications (stations).

Figure 119. Application Director installed applications

Column	Value	Description
Name	text	The name of the station directory.
Type	always station	This identifies the station as belonging to the Niagara family.
Status	text	Read-only field. Indicates the condition of the station at last polling. Idle — Station is not running, but can be started without a reboot. Running — Station is running. Starting — Platform daemon has started the station, but the station has not reported back its status back to the daemon. Stopping — Daemon has ordered the station to stop, but its process has not yet terminated. Halted — Station is not currently running, and cannot be restarted without a reboot. Failed — Station terminated with a failure exit code.
Details	text	`fox=` TCP/IP port monitored for regular (unencrypted) Fox connections to Workbench and other stations. Shows n/a if station is not running, or if `Fox Enabled` is set to `false`. `foxs=` TCP/IP port monitored for secure Fox connections to Workbench and other stations, if so configured. Shows n/a if the host does not support (or is enabled) for a secure connection, or if the station is not running, or if `Foxs Enabled` is set to `false`. `http=` HTTP port that the station’s WebService monitors for regular (unencrypted) browser connections to the station. Shows “n/a” if station is not running, or if it does not have a running WebService, or if Http `Enabled` is set to `false`. `https=` HTTP port that the station’s WebService monitors for secure browser connections to the station, if so configured. Shows “n/a” if host does not support (or is enabled) for a secure connection, or if the station is not running, or if Https `Enabled` is set to `false`, or if the station does not have a running WebService.
Auto-Start	`true` or `false`	If `true`, the station starts whenever the platform daemon starts as configured in the check box to the right side of the window.
Restart on Failure	`true` or `false`	If `true`, the daemon automatically restarts the station after it terminates with a failure exit codeas configured in the check box to the right side of the window.