Connections (bacnet-NodeSwitchConnections)
This component serves in multiple locations to display and clean up connections.
Figure 50. Connections properties
The screen capture shows the Connections component under the Node Switch. It also appears under the Hub Function.
To access these properties, expand and double-click Connections.
| Property | Value | Description |
|---|---|---|
| Enable Idle Cleanup | true (default) or false |
Turns connection cleanup on (true) and off (false).
|
| Idle Cleanup Interval | hours and minutes (defaults to 24 hours) | Configures when to clean up connections. |
Actions
- Add Connection (Node Switch only) allows optional configuration of a new
DirectInitiatingConnectionthat is added to the Connections component. - Disconnect All disconnects all connected hub-accepting connections on the Hub Function and direct-initiating and -accepting connections on the Node Switch.
- Remove All Idle Accepted deletes all hub accepting connections on the hub function. On the node switch, it deletes all direct accepting connections that are disconnected in the idle state.