Node Switch (bacnet-NodeSwitch)
This component manages the initiated and accepted direct connections made with other SC nodes.
Figure 48. Node Switch properties
To access these properties, expand and double-click Node Switch.
In addition to the standard properties (Status and Fault Cause), these sets of properties configure a node switch.
| Property | Value | Description |
|---|---|---|
| Accept Enabled | true or false (default)
|
Determines whether (true) or not (false) this port is enabled to accept direct connections from other nodes. To support accepting connections, a BACnet/SC user must
be associated with this port.
|
| Initiate Enabled | true or false (default)
|
Determines whether (true) or not (false) this port is enabled to initiate direct connections to other nodes.
|
| Web Socket Acceptor | additional properties | Configure the web socket servlet used to accept direct connections from other SC nodes. For property descriptions, refer to “Node Switch/Hub Function, Web Socket Acceptor (bacnet-JettyScWebSocketAcceptor).” |
| Accept Uris | array | Identifies the possible URIs that an initiating SC node can use to make a direct connection to this node. The values in this property are sent in the address resolution ack message. |
| Connections | additional properties | Configure node switch connections. For these properties, refer to “Connections (bacnet-NodeSwitchConnections).” |
Actions
- Add Sc User adds a secure connect user to the UserService. If a user is already associated with BACnet/SC, you receive an error message. No message confirms the addition.
- Remove Sc User removes a secure connect user from the UserService. No message confirms the deletion.