Warmup Config (web-WebWarmupConfig)

These properties configure what happens when a controller restarts. You can use them to speed up the loading time of the first page for Hx profiles. Once you have run an HxPx profile in a station, it records that you are an HxPx user, which enables Warmup Config by default the next time you restart the controller.

If you are not using Warmup Config or HxPx, turn it off by setting Enabled to No.

NOTE: Warmup Config does not run until and unless you set Enabled to Yes.

Figure 219. Warmup Config properties

To access this component, double-click Services > WebServices > Warmup Config.

Refer to separate topic.

In addition to the common properties (Status and Fault Cause), these properties are unique to this component.

Property	Value	Description
Enabled	`Yes`, `No` and `When User Activity Found` (default)	Controls when a user starts to use the HxPx feature.
Running	`true` or `false` (default)	Configures whether or not the WebWarmup is currently running. This is usually only `true` just after a station starts unless it ran manually with the Warmup action. When a station runs by default it is `true` unless the station runs manually with the Warmup action.
Interrupted	`true` or `false` (default)	Controls a station interrupt. This is usually `false` and only `true` in two cases: If WebWarmup is running and a user logs in when it is running. If WebWarmup is running and the WebWarmup config action called Cancel Warmup runs.
User Activity Found	`true` or `false` (default)	Controls if a warmup runs after a station reboot. For the Warmup process, this property is `true` when a user uses a framework feature. For example for the HxPxWarmup this property is `true` when a user loads an HxPx file from a browser. Once it is `true`, it stays `true` even after a restart. This allows the Warmup to run after a reboot. For HxPxAppWarmup, this property is `true` for any WebActivity.
Recent User Activity Found	`true` or `false` (default)	Functions the same as `User Activity Found` except after a restart when it defaults to `false`. It is a flagged transient.
Last Warmup Time	read-only	Displays the time of the last warmup.

Warmup Config (web-WebWarmupConfig)

Figure 219. Warmup Config properties

Related Links