User (baja-User)

This component represents a station connection, typically a specific type of person who needs to access the system or another system that makes a station-to-station connection (machine-to-machine). Users are children of the station’s UserService > UserPrototypes container.

Figure 194. Some Default Prototype properties

To open these properties, expand Config > Services > UserService > User Prototypes and double-click Default Prototype.

In addition to Enabled, these properties configure default users.

Property	Value	Description
Full Name	text	Provides additional information.
Expiration, Never Expires	radio button (enabled by default)	Indicates that this user is valid without restriction.
Expiration, Expires On	date and time	Limits the validity of this user. `Never Expires` permits this user to always log in. `Expires On` [date and time] allows this user to log in until the expiration date and time.
Lock Out	`true` or `false` (default)	Controls this user’s ability to access the system. `true` prohibits the user from logging in. `false` allows the user to log in without restriction.
Language	two lower-case letters	Defines the ISO 639 language code. For a list of codes, see the following: http://www.loc.gov/standards/iso639-2/langcodes.html.
Email	text	Provides an email address for information about this user.
Authenticator, Password and Confirm	text	Provides a password for this user.
Authenticator, Force Reset At Next Login	`true` or `false` (default for a new station)	Determines if the station resets the password when a user logs in. The next time the user logs in the system prompts for a password change. If you find yourself typically changing this each time you create a new User, change it to desired value in the Default Prototype.
Authenticator, Expires	radio button (defaults to enabled)	Saves the password for this user indefinitely. Typically, you leave this at default. However, it is possible you might change this to some far future date in the Default Prototype.
Authenticator, Expires On	radio button (defaults to disabled)	Sets a specific date and time after which the user must change their password.
Facets, Time Format		Configures the time format.
Facets, Unit Conversion		Configures the units to use.
Nav File	ORD	Identifies the file that contains the software navigation (customized navigation tree) appropriate for this user.
Prototype Name	drop-down list (defaults to `Default Prototype`)	Identifies the name of the prototype used to synchronize this user with the same user in other stations. The value of this property applies only when `Network User` is `true`.
Network User	`true` or `false` (default)	Configures this user to synchronize with the same user in other stations. `true` indicates that this user can be synchronized with other stations. `false` configures this user as a local user in this particular station only.
Cell Phone Number	telephone number	Provides a mobile number for information about this user.
Authentication Scheme Name	drop-down list	Selects the authentication scheme for user identity.
Roles	list	Identifies this user’s role(s).
Allow Concurrent Sessions	`true` (default) or `false`	Configures the station for multiple sessions. `true` permits multiple sessions. `false` prohibits multiple sessions.

Figure 195. The rest of the Default Prototype properties

To view these properties, scroll down.

Property	Value	Description
Auto Logoff Settings, Auto Logoff Enabled	`true` (default) or `false`	Controls automatic logoff. `true` automatically disconnects a station connection (session) via Workbench or web a browser if a period of inactivity exceeds the amount of time specified for the `Default Auto Logoff Period` as defined in the UserService) `false` does not automatically terminate a user’s session due to inactivity. NOTE: Separate auto logoff options exist for Workbench which functions independently of these station settings.
Auto Logoff Settings, Use Default Auto Logoff Period	`true` or `false` (default)	Configures the default setting for automatic logoff. `true` configures a specific `Default Auto Logoff Period` time. `false` ignores the specified `Default Auto Logoff Period`. Instead, you can use the `Auto Logoff Period` property to set a different auto logoff time period.
Auto Logoff Settings, Auto Logoff Period	read-only and hours minutes (defaults to 15 minutes)	Configures the amount of time until an automatic logoff. When `Use Default Auto Logoff Period` is set to `false`, this property specifies a different time period range from 2 minutes to 4 hours. Otherwise, this property is read-only, showing the value specified in the UserService’s `Default Auto Logoff Period`.
Default Web Profile, Type	sub properties	Configure how the framework functions in a browser. The first property, `Type`, selects the type of browser profile. This property defaults to `HTML5 Hx Profile`. Each profile provides a separate set of properties. The sections that follow in this topic document each profile.
Mobile Web Profile, Type	sub properties	Configure how the framework functions in a cellular device. Each profile provides a separate set of properties. The sections that follow in this topic document each profile.
Video Alarm Console Options	additional properties	Configures video alarms. “Video Alarm Console options (videoDriver-VideoAlarmConsoleOptions)” documents the additional properties.
Alarm Popup Settings	additional properties	Configures popup settings. “Console Recipient Monitor (videoDriver-ConsolerecipientMonitor)” documents the additional properties.
SAML Prototypes	container	Holds SAML prototypes.

HTML5 HX Profile

These properties configure the HTML5 HX Profile.

Property	Value	Description
Mobile Nav File (available for Mobile Wed Profiles only)	ORD	Selects the navigation file for a mobile device.
Hx Theme	drop-down list (defaults to Zebra)	Selects the look of the user interface: Zebra Lucid
Enable Hx Workbench Views	`true` (default) or `false`	Configures the interface to display all Workbench views.
Enable Nav Tree Side Bar	`true` (default) or `false`	Configures the interface to display the navigation tree (Nav tree).
Enable Search Side Bar	`true` (default) or `false`	Configures the interface to display the Search side bar.
Enable Palette Side Bar	`true` (default) or `false`	Configures the interface to display the Palette side bar.
Enable Nav File Tree	`true` (default) or `false`	Configures the interface to display the nav file tree in general.
Enable Config Tree	`true` (default) or `false`	Configures the interface to display the Config tree.
Enable Files Tree	`true` (default) or `false`	Configures the interface to display the Files tree.
Enable Histories Tree	`true` (default) or `false`	Configures the interface to display the History tree.
Enable Hierarchies Tree	`true` (default) or `false`	Configures the interface to display the Hierarchy tree.
Enable View Selection	`true` (default) or `false`	Configures the interface to display the navigation tree (Nav tree).

Velocity Doc Web Profile

Property	Value	Description
Template File ORD	ORD (defaults to null)

Basic Hx Profile, Default Hx Profile, Handheld Hx Profile,

Property	Value	Description
Mobile Nav File (available for Mobile Wed Profiles only)	ORD	Selects the navigation file for a mobile device.
Hx Theme	drop-down list (defaults to Zebra)	Selects the look of the user interface: Zebra Lucid

Default Mobile Web Profile (obsolete)

Property	Value	Description
Theme, drop-down list	defaults to `mobile`
Theme, second drop-down list	defaults to `DefaultJQueryMobileTheme`
Show Header	`Show` (default) or `Hide`
Show Header Back Button	`Show` (default) or `Hide`
Show Select Views	`Show` (default) or `Hide`
Show Home	`Show` (default) or `Hide`
Show Logoug	`Show` (default) or `Hide`

Default Mobile Handheld Hx Profile

Property	Value	Description
Mobile Nav File (available for Mobile Wed Profiles only)	ORD	Selects the navigation file for a mobile device.
Hx Theme	drop-down list (defaults to Zebra)	Selects the look of the user interface: Zebra Lucid

Basic Wb Web Profile, Default Wb Web Profile, Handheld Wb Web Profile and Simple Admin Wb Web Profile

Property	Value	Description
Workbench Theme	drop-down list (defaults to Zebra)	Selects the look of the user interface: Zebra Lucid
Show Web Start Address Bar	`true` (default) or `false`
Show Web Start Status Bar	`true` (default) or `false`