Maximum override duration facet
Figure 61. Default override action menu for writable control point
Figure 61. Default override action menu for writable control point
Figure 61. Default override action menu for writable control point
If needed, change this by adding a maxOverrideDuration facet (choosing type baja:RelTime), with specified duration time, to either or both:
- Config, Sys Info property
- Any writable control pointNOTE: Override limits affects operator overrides (level 8) only, as emergency level overrides (level 1) are always unlimited in duration. In other words, an emergency level override lasts until an emergency level “auto”. <<<<<<< HEAD <<<<<<< HEAD=======
Figure 62. Config Facets editor when picking maxOverrideDuration
>>>>>>> release/4.10.4 =======Figure 62. Config Facets editor when picking maxOverrideDuration
>>>>>>> release/4.10.4Figure 62. Config Facets editor when picking maxOverrideDuration
When a writable point is limited by a maxOverrideDuration facet, its action menu adjusts to show the allowable range.
Config, Sys Info property
The Sys Info property of the station’s root Config component has a facets control, shown in the Config component’s property sheet.
Figure 63. Global maxOverrideDuration facet added to Sys Info property of station’s Config component
Figure 63. Global maxOverrideDuration facet added to Sys Info property of station’s Config component
Figure 63. Global maxOverrideDuration facet added to Sys Info property of station’s Config component
Adding this facet on the Sys Info property acts a global limit (station-wide) to a manual override action to all control points
that do not have their own maxOverrideDuration facet.
Any writable control point
Each writable control point in the station can have a separately specified maximum override duration. If this facet is present,
it overrides any global (Sys Info) maxOverrideDuration value.
Figure 64. Added maxOverrideDuration facet added at point level (overrides global setting)
Figure 64. Added maxOverrideDuration facet added at point level (overrides global setting)
Figure 64. Added maxOverrideDuration facet added at point level (overrides global setting)
As shown, this maxOverrideDuration facet can be added along with any other facets in use by the control point. The example BooleanWritable point above already
had configured facets for trueText and falseText.
Action menu examples
Example action menus from writable points with a maxOverrideDuration facet in effect are shown .
Figure 65. Example override action menus affected by maxOverrideDuration facet
|
Global (Sys Info) level example |
Point level example |
||
|---|---|---|---|
<<<<<<< HEAD
<<<<<<< HEAD
 |
  |
  |
 |
If a system user attempts to invoke a Custom override over the specified maxOverrideDuration limit, an error window appears that shows the override duration range as shown below.
Figure 66. Custom override attempt over maxOverrideDuration limit produces error window
Figure 66. Custom override attempt over maxOverrideDuration limit produces error window
Figure 66. Custom override attempt over maxOverrideDuration limit produces error window
As shown above, the allowable duration range appears in [brackets], in this case [1ms - 1hour].