ForwardingWiretap
This component sends each captured message to a specified IP address. Once the message arrives, you may use a packet dissection
tool, such as Wireshark, to investigate network problems.
Figure 90. ForwardingWiretap properties
| Property | Value | Description |
|---|---|---|
| Facets | trueText (default) or falseText | Facets contain additional data applied to input and output values.
For example, you might want to set the facet trueText to display “ON” and the facet falseText to display “OFF.” "Units of measurement" is also a type of facet. You can view Facets on the Slot sheet and edit them from a component Property sheet by clicking the >> icon to display the Config Facets window. |
| Proxy ext | null indicates that the point is an empty placeholder. The station itself originates the point’s default Out value.driver type identifies the driver and point type. For example, a proxy ext of BacnetBoolean identifies a BooleanWritable. The point under the Points container of a Bacnet Device has a proxy extension of BacnetBooleanProxyExt. | A frozen property found on each point that indicates from where the point’s data originate, including details specific to the parentage of the point’s network and communications (driver). |
| Out | value facets {ok} | The current out value, including any point facets. Out display of a proxy point defaults to only the single (configured) property value, along with the status for the proxy point. You can edit point facets to poll for additional properties, such as the native "statusFlags" and/or "priorityArray" level. |
| Enabled | true or false |
Activates and deactivates use of the function. |
| Update Interval | hours minutes seconds | Indicates how frequently new information is reported. |
| Address | IP address | The IP address of the source or destination device. |
| Port | numeric | The port number on the controller or computer. |