Platforms and software

The OPC UA drivers function on any QNX-based platform running Niagara 4.3 or later, such as the JACE-8000, as well as Windows-based platforms (Windows 7 Service Pack One and later) running Niagara 4.3 or later

In addition to the framework software, the OPC UA server requires software, such as Prosys OPC UA Simulation Server, installed on your PC. You use this to configure and manage the OPC UA server.

License requirements

The opcUaClient module requires a license for the “opcUaClient” feature. This license may have other OPC UA client device, proxy point, and history limits.

The opcUaServer module requires a license for the “opcUaServer” feature. This license may have other OPC UA client device, proxy point, and history limits.

To check to see if your software installation is licensed for opcUaClient and/or opcUaServer, open the license file from the License Manager view. The feature name is present only if your platform is licensed for the feature, as shown here:

< feature name="opcUaClient" expiration="2020-12-31" history.limit="" point.limit="" device.limit=""/ >
< feature name="opcUaServer" expiration="2020-12-31" history.limit="" point.limit="" device.limit=""/ >

Server modules

The server driver requires these modules in the host station:

Client modules

The client driver requires these modules in the host station: