This document covers the initial software installation and configuration for the AX SoftJACE, using either NiagaraAX-3.8 (AX-3.8) or NiagaraAX-3.7 (AX-3.7). It assumes that you are an engineer, technician, or service person who is performing control system installation. This document is also in NiagaraAX Workbench help, providing that the “docSoftJace” module is installed.

This document does not cover station configuration or NiagaraAX components. For more information on these topics, please refer to NiagaraAX Workbench online help and the NiagaraAX User Guide.

The following sections are in this document: