Use the ZWave Point Manager to review and edit ZWave proxy points under the Points extension of a selected Z-Wave device
(ZWaveDevice or ZWaveThermostat). The ZWave Point Manager is the default view on both these components. To view, double-click the Points extension, or right-click and select ->.
For more details, see ZWave Point Manager.
By default, the following columns appear in this point manager:
-
Name
Niagara name of the ZWave proxy point. Default names depend on the associated Z-Wave command class.
-
Type
Niagara type of NiagaraAX control point used as the proxy point (e.g. NumericPoint, BooleanPoint, EnumPoint, NumericWritable, EnumWritable, or BooleanWritable).
-
Out
Current last polled value (out slot) of the proxy point, reflecting status and facets.
-
Tuning Policy Name
Assigned tuning policy (Default Policy, or other if available and assigned).
In addition, using the 
table options control, the following additional data columns are available:
-
Path
Station path of the proxy point, relative to the root.
-
Enabled
Whether enabled (true, default) or disabled (false).
-
Facets
Assigned units (AI or AO), trueText and falseText (BI or BO), or enum range (Enum).
-
Device Facets
Typically reflect point facets, if not blank..
-
Conversion
Niagara conversion type used, such as Default, Linear, or Reverse Polarity.
-
Age
Time since last value update from the Z-Wave device.
-
Next Wake Up In
If the parent device is battery-powered, this shows the timestamp of its next anticipated “wake up”.
-
Fault Cause
If the point is in fault, explains why.
-
Read Value
Last read value from device.
-
Write Value
Last value written to device (if applicable).