The Network Scene Manager is the default view of any child scene under the 
Scenes extension of the ZWaveNetwork. Scenes are defined combinations of actions across one or more devices that can be “activated”
by a single command. Use this view to add new nodes for a scene, edit any node in the scene, and activate that scene.
Each entry (row) is a “NetworkSceneConfig” component (ZWaveNetworkSceneConfig) that specifies a particular device (node) and action. For detailed information, see Creating and setting up scenes.
By default, the Network Scene Manager has following data columns enabled:
-
Name
Name of the “ZWaveNetworkSceneConfig” component.
-
Scene Id
Z-Wave scene ID, integer 1 - 255 (should be the same for all NetworkSceneConfig components)
-
Node Id
Z-Wave node ID for that device.
-
Dimming Duration
Specified time it takes for the device to ramp to the specified Level.
-
Level
Final dimming level, from 0 to 99 (or if a dimmer), or if a Boolean (binary) type, 0 for Off or 255 (or any non-zero value) for On.
-
Current Value
Current real-time value of the device.
-
Fault Cause
Typically blank, unless a ZWaveNetworkSceneConfig component has a fault status.
In addition, using the table options control, the following additional data column is available:
-
Path
Niagara station path of each “NetworkSceneConfig” component (ZWaveNetworkSceneConfig), relative to the root.