To add a ZWaveNetwork in the station

1. Double-click the station’s Drivers container, to bring up the Driver Manager.

2. Click the New button to bring up the New network dialog. For more details, see “Driver Manager New and Edit” in the Drivers Guide.

3. Scroll to select “Z Wave Network,” number to add: 1 and click OK.

   This brings up a dialog to name the network.

4. Click OK to add the ZWaveNetwork to the station.

   You should have a ZWaveNetwork named “ZwaveNetwork” (or whatever you named it), under your Drivers folder, showing a status of “{fault}” and enabled as “true.”

   After you Configure ZWaveNetwork communication parameters, status should change to “{ok}”.