Z-Wave compatibility

The ZWave driver was developed against the Z-Wave Command Class Specification, Version 8, and also the Z-Wave Device Class Specification, Version 18. Specification documents for both are included in the Z-Wave reference documents section that follows. The driver was tested with Z-Wave Gateways running versions 2.24 and 2.74 of the static controller library.

Z-Wave reference documents

The following documents, listed by Zensys document ID number and title, may be referenced in this driver document.

  1. SDS11060-8     Z-Wave Command Class Specification

  2. SDS10242-18   Z-Wave Device Class Specification

  3. SDS10243-8    Z-Wave Protocol Overview

  4. INS102044-5    Z-Wave Node Type Overview and Network Installation Guide

Also see the section Z-Wave command classes supported.