The following is required for SRAM support in a JACE controller, using either “onboard” SRAM or the SRAM option card, along with the platform DataRecoveryService:
A JACE-6E or JACE-3E controller with onboard SRAM, or
A JACE-603 or JACE-645 with onboard SRAM, licensed to run a NiagaraAX station, or
A JACE-2,-6,-7 controller running AX-3.6 or later, with an available option card slot, and
An SRAM option card, installed in that option card slot.
The “platDataRecovery” module must be installed in the JACE
(this module is automatically installed in platforms that do not need the SRAM option card).
The JACE must also be licensed for this feature—see Licensing.
Copyright © 2000-2016 Tridium Inc. All rights reserved.