Poll, when invoked, forces the driver to send a message to read the current values for this device.

Modify Suction Target, when invoked, prompts for, and then sends, a message to modify the suction target value for this suction group.

Modify Suction Count, when invoked, prompts for, and then sends, a message to modify the suction cut-out value for this suction group.

Poll Interval is the period of time between automatic polling actions when this component is in a subscribed state.

Last Update is the time stamp at which this component was last polled and updated.

Write Status is a string that indicates the results of the last Set Target action.

Rack Id is an identification number for this rack.

Suction Id is an identification number for this suction group.

Group Name is the name returned for this suction group.

Num Circuits is the number of circuits for this suction group. an AK255SuctionCircuit component is added for each circuit.

Suction Pressure is the current suction pressure returned for this suction group.

Suction Target is the current suction pressure target returned for this suction group.

Suction Cutout is the current suction pressure cut-out returned for this suction group.

Suction Control is the current suction control that the AK255SuctionControl component returned for this suction group.

Alarm Hi limit is the current alarm high limit that the Ak277AlarmLimit component returned for this suction group.

Alarm Lo Limit is the current alarm low limit that the AK255AlarmLimit component returned for this suction group.

Defrost Auto Schedule is a boolean value returned for this suction group.

Circuit1 - n is an AK255SuctionCircuit component for each circuit supported by this suction group.