AK255SuctionCircuit is used to display information about the suction circuit in the AK255 device.
Some of the frozen properties of the device components are automatically hidden if the device does not return a value for
the slot.
The following actions are associated with this component:
-
Poll, when invoked, forces the driver to send a message to read the current values for this device.
-
Modify Temperature Target, when invoked, prompts for, and then sends, a message to modify the target temperature value for this suction circuit.
-
Modify Temperature Range, when invoked, prompts for, and then sends, a message to modify the temperature range for this suction circuit.
-
Manual Defrost, when invoked, prompts for, and then sends, a message to initiate a manual defrost cycle.
The following properties are unique to this component:
-
Poll Interval is the period of time between automatic polling actions when this component is in a subscribed state.
-
Last Update is the timestamp at which this component was last polled and updated.
-
Write Status is a string property that indicates the results of the last Set Target action.
-
Rack Id is the identification number for the suction circuit rack.
-
Suction Id is an identification number for the suction circuit.
-
Circuit Id is an identification number for the suction circuit.
-
Circuit Name is the name returned for this suction circuit.
-
Circuit Status is the current status returned for this suction circuit.
-
Temperature Target is the current target temperature for this suction circuit.
-
Temperature Range is the current target temperature range for this suction circuit.
-
Defrost is the current AK255CircuitDefrost component for this suction circuit.
-
Sensor Count is the number of sensors used for this suction circuit.
-
Sensor 1 - n is the AK255SensorValue component to be added for each sensor supported.