AK255Condenser is used to configure and display information about the condenser in the AK255 device.
Some of the frozen properties of the device components are automatically hidden if the device does not return a value for
the slot.
The following action is associated with this slot:
-
Poll, when invoked forces the driver to send a message to read the current values for this device.
The following properties are associated with this component:
-
Poll Interval is the period of time between automatic polling actions when this component is in a subscribed state.
-
Last Update is the time stamp at which this component was last polled and updated.
-
Write Status is a string that indicates the results of the last Set Target action.
-
Rack Id is an identification number for this rack.
-
Condenser Name is the name of the condenser as returned by the device.
-
Value is the current value returned by the device.
-
Condenser Type is the type of condenser returned by the device.
-
Fan Type is the type of fan returned by the device.
-
Num Fans is the number of fans returned by the device.
-
Control Sensor is the control sensor returned by the device.
-
Control Type is the control method returned by the device.
-
Alarm Hi Limit is the upper limit of the AK255AlarmLimit component as returned for this condenser.
-
Alarm Lo Limit is the low limit of the AK255AlarmLimit component as returned for this condenser.
-
CutinStages adds an AK255CondenserStages component to the model if the Control Method property is set to CutInOut.
-
CutoutStages adds an AK255CondenserStages component to the model if the Control Method property is set to CutInOut.