NOTE: This is true for a JACE-8000 that you have downgraded to run
AX-3.8U1. You must then use the
AX-3.8U1
Workbench and configure the platform with the Commissioning Wizard.
NiagaraAX
Workbench is generally recommended for all platform operations with
AX-3.x JACE controllers. If needed, however, you can use
Niagara 4
Workbench to perform some platform operations on
AX JACE controllers. Examples include modifying TCP/IP configuration, or installing
AX software modules. Note the latter requires you to import the “software database” of a recent (
AX-3.8)
Supervisor or engineering workstation into your
Niagara 4 software database.
Other platform views/operations that are unavailable using
Niagara 4
Workbench for a platform connection to an
AX-3.x JACE controller are:
- DDNS Configuration
- GPRS Modem Configuration
- WiFi Configuration (for JACE-700 with installed WiFi option)
- Also unavailable are following operations from the Platform Administration view:
- Update Authentication
- FTP/Telnet
- Set Module Filter
Use the appropriate
NiagaraAX
Workbench to perform such
NiagaraAX platform configuration.