Opening a platform connection to a JACE

  1. From the menu bar, select File > Open > Open Platform.
    The Open Platform dialog box appears.
  2. Complete the fields in the Open Platform dialog box as follows:
    • Type — Select Image Platform Connection, if not already selected.
       
      NOTE: By default, Workbench prompts for a Platform TLS Connection.
       
    • Host — Leave at default IP, and type in the IP address of the new JACE.
    • Port — Leave at default 5011.
    • Credentials, which may be:
      • Username — Type in default username, for example: tridium
      • Password — Type in default password, for example: niagara
  3. Click the OK button to accept all settings.

The Platform opens in the tree, and its Nav Container View displays in the view pane.

Figure 1.   Connected JACE platform
Image