About this guide

This document covers the initial Niagara 4 software installation and configuration for a QNX-based JACE-8000 controller, using Niagara 4 Workbench (4.1.n).

The information in this document is intended for an engineer, technician, or service person who is performing control system installation. All information in this document is also available in the in Workbench help system.

For physical mounting and wiring details for any JACE controller, please refer to its specific hardware installation document.

This document does not cover station configuration or Niagara 4 components. For more information on these topics, please refer to online help and various other Niagara 4 software documents.