To review and finish the Commissioning Wizard

After the final selected step in the Commissioning Wizard, a “Review of changes” dialog appears, as shown in Figure 22. It lists a summary of all remaining actions to be performed by the wizard.

Before proceeding:

1. Read through the summary of changes, using the scroll bar to see those steps near the end.

   • If no change is needed, click the Finish button to initiate the rest of the Commissioning Wizard.

   • If any change is needed, click the Back button until the step dialog appears, then make the change. Then, click the Next button until this review dialog appears again.

2. While the wizard is working, progress updates are posted in a “Completing Commissioning” dialog. When completed, the wizard reboots the JACE, and a “Close” button is available (Figure 23).

3. Click the Close button to exit the wizard.

   When the JACE reboots, your platform connection to it drops. Notice that in the Nav tree, the platform instance for that JACE is now dimmed.

4. Right-click and close that platform instance (Figure 24), as it is now invalid due to changed IP address.