To add a LonNetwork in the station

Use the following procedure to add a LonNetwork component under the station’s Drivers container.

If the host JACE has multiple LON ports, add one LonNetwork for each physical port. Under each LonNetwork, in Lon Comm Config, specify the port’s Device Name (LON1, LON2).

To add a LonNetwork in the station:

1. Double-click the station’s Drivers container, to bring up the Driver Manager.

2. Click the New button to bring up the New DeviceNetwork dialog. For more details, see “Driver Manager New and Edit” in the Drivers Guide.

3. Select “LonNetwork,” number to add: 1 and click OK.

   This brings up a dialog to name the network.

4. Click OK to add the LonNetwork to the station.

   You should have a LonNetwork named “LonNetwork” (or whatever you named it), under your Drivers folder, showing a status of “{ok}” and enabled as “true.”