The GPRS Modem Configuration view (Figure 15) is one of several platform views for a QNX-based JACE, when using AX-3.4 Workbench or later. It its used to configure the (wireless) GPRS modem option that may be installed in the host JACE controller.

In order to operate, the GPRS modem option must have a SIM card (Subscriber Identity Module) installed. The SIM card must be from an approved Service Provider.

Associated with this, several key properties must be entered in the configuration sections of this view. See the previous section Required platform GPRS setup for details.

The following sections provide additional reference details about this platform view (and corresponding Gprs Platform Service Plugin view):