Run the conversion to new style Provisioning

Perform the following only after reading the previous Note in the previous section.

To convert the Supervisor to use the newer style provisioning

In Workbench, open the running Supervisor station.
Expand its Config space to reveal its ProvisioningService in its Services folder.
Right-click the ProvisioningService, and in the popup menu choose Upgrade from Provisioning 3.1

A second Confirm dialog appears, asking whether to convert to a “ProvisioningNiagaraNetworkExt”. Click Yes.
The Workbench view changes to the station’s Job Service Manager, in which you see two related jobs—first a Station Save, then the Conversion. Both jobs typically complete within a few seconds.
The provisioning conversion is now complete. Notice that the ProvisioningService is now gone, but a BatchJobService was added. Also, the NiagaraNetwork now has a “ProvisioningNwExt”, with similar views as the old ProvisioningService.

Assuming that provisioning was previously configured and operational, it should now be operational for your NiagaraNetwork.

For “quick start” information see Run provisioning jobs.