Actions

As shown in Figure 63, each StationProxy provisioning extension provides a number of actions, available as right-click commands.

Figure 63. Action menu for StationProxy extension

Many of these actions are also available in the Provisioning Station Director view, as well as in views using a direct platform connection. When invoked, each action performs as follows:

Poll — Causes Supervisor to poll the host’s platform daemon for current data.
Dump Threads — Supervisor requests that the station send a thread dump to its console output.
Save Station— Supervisor requests that the station save its current state to its own (local) config.bog file.
Stop Station — Supervisor requests that the station shuts down gracefully.
Start Station — (applicable only if current station status is idle). Supervisor requests the platform daemon to start the station.
Kill Station — Supervisor requests for the station to terminate immediately, without graceful shutdown.
Restart Station — Depending on “Is Restart Enabled” value, causes one of the following:
- If “Is Restart Enabled” is false — Station’s host is rebooted.
- If “Is Restart Enabled” is true — Station is stopped gracefully, then restarted again.
Reboot Host — Depending on “Is Reboot Enabled” value, causes one of the following:
- If “Is Reboot Enabled” is false — Nothing happens.
- If “Is Reboot Enabled” is true — Supervisor requests for the platform daemon to shut down gracefully, then reboot the host.