The two checkboxes at the top of the Niagara Network Prototype View determine if alarms are to be issued by the BatchJobService for this provisioning job, and under what circumstances. Alarms use the alarm class specified in the property sheet of the BatchJobService, and appear listed in an alarm console as alerts.
-
Generate an alarm when any step fails or is canceled — if checked, an alarm is raised whenever a job step fails or is canceled.
-
Generate an alarm when a job completes successfully — if checked, an alarm is raised whenever a job completes with no step failures.
Checkbox settings apply to the provisioning job being built, and do not affect other provisioning jobs that may exist (either
as other provisioning components, jobs already queued to run, or built in the Niagara Network Job Builder).
For further details, see About provisioning-related alarms.