Stopping the platform daemon

This procedure describes commands to stop the Linux AxSupervisor and to verify that it is not running.

Prerequisites:

NOTE: You rarely stop the platform daemon (and station) on any AxSupervisor, except immediately before installing a new point release (an upgrade).

Perform the following steps:

At the command line, type the following to stop the platform daemon.
<user>@<host>:/usr/bin# niagaradctl stop 

Stopping Niagara Daemon: [ OK ]
Type the following at the command line to verify that the daemon has stopped:
<user>@<host>:/usr/bin# niagaradctl status 

niagarad is stopped