Select Local Niagara R2 Installation Directory

This step in the Install Niagara R2 wizard is where you specify the source Niagara R2 release directory (build 2.301.535 or later), from which you choose R2 items to install in the controller.

Figure 8. Select Local Niagara R2 Installation Directory (default)

This Niagara R2 release directory is used in subsequent steps, to install an R2 station, R2 software modules, R2 license, and R2 lexicon files.

To specify the Niagara R2 directory

At the Niagara R2 Installation step (Figure 8), do the following:

Click the open folder control. A popup dialog (directory chooser) appears.
Use navigation controls to select the root directory of the Niagara R2 installation.

To do this, click the My File System node, then expand the proper drive node to show the root directory for the Niagara R2 installation. For example, D:/niagara/r2.301.535.

Figure 9. Select root folder of Niagara R2 installation in popup dialog

Click the root folder to select (highlight) it, as shown in Figure 9, and click Choose.

The popup dialog closes, returning to the Niagara R2 Installation step, now showing the path to source Niagara R2 installation. For example: /D:/niagara/r2.301.535
Click the Next button to continue.

The next step appears, typically Install Local Niagara R2 Station.