The R2 Platform Tool is a platform view available only in a Workbench platform connection to a JACE-603 or JACE-645 that has been configured for Niagara R2 (using the Install Niagara R2 wizard).

This view provides many of the same functions in the R2 “Admin Tool”, and may be useful for ongoing host platform maintenance of an R2-configured JACE-603 or JACE-645. As shown in Figure 19, this view has a “Current R2 Installation” path at the top, and below that four selectable tabs.

These five parts of this view are explained in the following sections: