A Workbench platform connection to an R2-configured JACE-603 or JACE-645 provides other platform views apart from the few described in other sections of this document (Platform Administration view, TCP/IP configuration, and R2 Platform Tool). This section describes those additional platform views, and how they apply to a JACE configured for Niagara R2.

The License Manager and Software Manager platform views are available for an R2-configured JACE, but do not affect its Niagara R2 configuration. Instead, use the R2 Platform Tool for these functions. In addition, if using “full Workbench” (able to commission NiagaraAX-configured JACEs) please ignore any additional platform views that may appear. These include the views DDNS Configuration, Dialup Configuration, GPRS Modem Configuration, Lexicon Installer, and Station Copier. These views do not apply to Niagara R2-configured platforms.

For a summaries on the other platform views that do apply to an R2-configured JACE, see the following: