Starting in NiagaraAX-3.4.53, the “RemoteVideo” feature adds new capabilities to the video framework. This feature includes the following remote support capacities:
-
Supervisor Alarms
A supervisor station alarm console can display video associated with an alarm that was generated at a remote station. In order to use this feature, you need to have a supervisor station that is licensed for the remote video feature. The remote station in this scenario should be configured for video alarms and must be set to route alarms to the supervisor using a “station recipient” component in the alarm service. In addition, the supervisor and the remote station must have a “RemoteVideoService” component under their Services node. When properly configured, the supervisor alarm console displays any remote video alarm, annotated with the video icon. You can review the remote alarm video by clicking the button.
-
Supervisor Graphics
A Supervisor station can support video graphics (using Px widgets) and have them served by cameras that are attached to remote stations under the supervisor’s NiagaraNetwork. The following Px Widgets are located in the videoDriver palette Px Folder and support remote video:
-
Live Video Player
-
Control Panel
-
Pan Tilt Joystick
-
Zoom Slider
-
Camera Widget
-
-
Remote Video Playback
The Playback Viewer component displays live or recorded video from any recording device that is configured on a remote station communicating over the Niagara Network.
-
Remote Video Surveillance
The Video Surveillance Viewer component displays live or recorded video from any recording device that is configured on a remote station communicating over the Niagara Network
-
Remote Video Recording
Video recording devices on local stations may initiate recording as a result of an alarm event that occurs at a remote station communicating over the Niagara Network.
