Figure 356 shows an example of the Bacnet Service property sheet. Select Tools-> BACnet Service from the Workbench main menu to add this service to the “My Tools” node of the nav tree. The default view is the property sheet view.

You can use this Workbench Tools service to configure a local Bacnet device in the same way as a you would under a station, as described in the Bacnet Guide. However, any configuration that you do using the Workbench Bacnet Service (under the “My Tools” node) will be lost when you close Workbench. Use Bacnet Service under a station to save your Bacnet Service settings to a database.

Refer to the Bacnet Guide for a detailed description of the Bacnet service.