PREVNEXT

brandLogo: alt="EnergyLogo"

About the Equipment Operation Report

Users have the ability to analyze digital points and identify run times. Comparisons between sites or points can be made and run times can be graphed. For example, comparing lighting or HVAC run hours in a group of stores or comparing HVAC run hours in June for Store 1 versus Store 2. Data is displayed in time and percentage.

Figure 4-11 Equipment Operation Report Example.

Creating an Equipment Operation Report.

To create an Equipment Operation Report, perform the following tasks:

Start the Equipment Operation Report

  1. Launch from your browser using the following URL: http://hostname/eas where hostname is the name or IP address of the Web Supervisor.
  2. Enter appropriate login information to gain access to the home page.
  3. From the home page, open Equipment Operation by clicking on the Equipment Operation link.
  4. Click on New. You may need to enter security information for the Java Plug-in.

    Note: If you desire, from within an existing report, it is easier to simply use the Goto Reports Pull-down menu on the upper right to select the desired report.

Select the Data Points to Chart

  1. Expand the tree to find the site and data point you wish to chart.
  2. Right click on the data point and select Add to Report.
    You will see the data point in the Selection window

    Note: If you select a site or a meter, all multi-state data points within that object will be added to the Selection window.

  3. Repeat adding data points or copying and pasting data points until you have all of the points in the report that you want to chart.

Set Report Parameters

  1. In the Period frame, select the time period for the data and which days of the week to exclude from the report (if any).
  2. Click on Run Report.
Figure 4-12 Equipment Operation Report Sample Exercise.
shortBrandName
PREVNEXT