brandLogo: alt="EnergyLogo"

About the license.properties file

---

Both E2 Profiler and Cost Profiler have individual license components.

Note: Starting in NiagaraAX-3.3, the Cost Profiler license checks are removed (no check for a “costMeter.limit”) so there is unlimited use of Cost Profiler available.

The following items must be present in the license.properties file in order for shortBrandName to be licensed properly, (see Figure 2-2).

Figure 2-2 Example license file

• feature

  The feature property for E2 Profiler and Cost Profiler must have a name="eas" parameter. This parameter provides all the functionality of the “demo mode. In order to create and use new data, you must have one or more additional parameters set, as follows.

• expiration

  This property must have a valid expiration date set. Valid dates include future calendar dates and “never”.

• costMeter.limit

  Note: Starting in NiagaraAX-3.3, this property is not used.

  This property specifies the number of meters allowed for Cost Profiler. If the costMeter.limit property is not set, shortBrandName is not licensed for the Cost Profiler module and none of the Cost Profiler reports are visible (unless you are running in “demo” mode).

  Note: In demo mode you see all reports, but the reports reflect only the demo data.

  An example “costMeter.limit” entry for Cost Profiler reads as follows:

  costMeter.limit=”15”

• dataPoint.limit

  This property specifies the number of data points allowed for the E2 Profiler. If the dataPoint.limit property is not set, shortBrandName is either not licensed for the E2 Profiler module (and none of the E2 Profiler reports are visible) or it is running in “demo” mode, which means no datatPoint.limit or station.limit is defined.

  Note: In demo mode you see all reports, but the reports reflect only the demo data.

  An example “dataPoint.limit” entry for E2 Profiler reads as follows:

  dataPoint.limit=”150”

• station.limit

  This property specifies the maximum number of stations that are each allowed to be the source of an unlimited number of histories for use as shortBrandName data points. The “dataPoint.limit” is used to set the maximum number of data points that are allowed for histories that are sourced from stations that are not included in the station.limit group or from other sources.

  Note: In demo mode you see all reports, but the reports reflect only the demo data.

  An example “station.limit” entry reads as follows:

  station.limit=”2”

In addition to the other license properties, in shortBrandName NiagaraAX build 3.1.11 and later, the following attributes provide licensing at the report level, as described:

• allCostReports

  Licenses all Cost Profiler reports

• allE2Reports

  Licenses all E2 Profiler reports

• aggAnalysis

  Licenses the Aggregation Analysis report

• avgProfile

  Licenses the Average Profile report

• billReconcile

  Licenses the Bill Reconciliation report

• budgetReport

  Licenses the Budget report

• configuration

  Licenses the Configuration report

• correlationReport

  Licenses the Correlation report

• costContribution

  Licenses the Cost Contribution report

• costRank

  Licenses the Cost Ranking report

• entRanking

  Licenses the Enterprise Ranking report

• equipOp

  Licenses the Equipment Operation report

• exception

  Licenses the Exceptions report

• loadDuration

  Licenses the Load Duration report

• pointTrending

  Licenses the Point Trending report

• rateComparison

  Licenses the Rate Comparison report

• relContribution

  Licenses the Relative Contribution report

• reportAdmin

  Licenses the Report Administration report

• spectrum

  Licenses the Spectrum Summary report

• whatIfAnalyzer

  Licenses the What-If Analyzer report