brandLogo: alt="EnergyLogo"

Using the Universal Comparison Feature

---

This feature converts data point’s engineering values from electricity, gas, and other fuels to a common measurement unit.This isn’t just changing the label, but actually converting the data from one measurement unit to another. Once the consumption values are converted to a common unit, you have a better ability to compare efficiency or to analyze the total energy breakdown for a site or group of facilities. Values can be converted to KBTU, MMBTU, CCF gas, therms, etc.

Note: The Universal Comparison feature does not change Default units. Default units are only changed in the Configuration screen - not in the report templates screen.

Changing the Common Energy Units.

1. Right click on a data point in the selection window.
2. Select Configure. You will get the Input Configuration dialog.

3. Pull down the energy unit field, and select the one of your choice.

4. Click on OK

   Note: You can also modify the displayed name and the charted color of the selected object from this same Configuration dialog.