platDaemon-ApplicationDirector
The Application Director view interfaces to each station whether it is running or not.
Figure 123. Application Director view, looking at Niagara station
The Application Director is split into three main areas:
- — at top
- Application output — main area
Related are log levels defined for the station. See “Station log levels (DebugService)”
- Application and output controls — right-side checkboxes and buttons
NOTE: In the Application Director for any JACE, the installed applications area should show (at most) only one station, as shown above. However, the Application Director for a Windows platform (Figure 124. Application Director for
Even if a Windows platform is licensed for more than one station, running multiple stations at the same time requires you to use non-default ports for all but one of them to avoid port binding issues. For example, use a Fox and Foxs port other than 1911 or 3011 respectively, or Http and Https port other than 80 or 443 respectively.