Auto-startSpecifies whether the station starts following platform daemon startup. This means following a host reboot, perhaps as a result
of a power cycle, but possibly from a Reboot command.
NOTE: For any JACE controller, a reboot also occurs following any installed dist file(s), as well any TCP/IP-related changes. However, installing
new modules from the Software Manager—say, for a new driver, does not always result in a reboot (yet in a few cases, in order
for a module to become effective, a reboot may be required—and so is prompted following the module install). At the same time,
note that changing any existing module (upgrading or downgrading) always results in a reboot.
Restart on FailureSpecifies whether the platform daemon restarts the station if its process exits with a nonzero return code (e.g., engine watchdog
had killed the station because of a “deadlock” condition).
NOTE: JACE controllers cannot have a station restart without a reboot. Therefore, if this setting is enabled on such a JACE, if
the station fails (terminates with error), the controller reboots. If the controller continues to have 3 "automatic reboots"
like this within an hour (or however many specified in the station's PlatformService "Failure Reboot Limit" property), it
remains in a "Failed" state, regardless of the setting above. For related details, see configuration.