Station Copier

The Station Copier is one of several platform views. You use it to install a station in a remote NiagaraAX platform, as well as make a local backup copy of a remote station (copy its station database and files to your PC). You can also rename and delete stations, either locally or remotely.

You see this view even when opening a local platform connection at your Supervisor computer as well as when opening a remote Niagara host. The following figure shows the Station Copier in a platform connection to a controller.

Figure 83. Station Copier view for remote JACE platform

As shown above, the Station Copier view is split into two main areas:

Stations on your Workbench PC (left side)
Remote Station on the opened JACE platform (right side)

By default, contents of the !/stations folder is shown on the Workbench (left) side. If you have station folders located elsewhere, click the folder icon for a Change Directory dialog, and point the Station Copier to that location. That alternate location is remembered the next time you access the Station Copier.

Station Copier

Figure 83. Station Copier view for remote JACE platform

Related Links