For management of PKI certificate stores and/or allowed host exceptions, used in certificate-based TLS connections between the station/platform and other hosts. For details, see the Niagara 4 Station Security Guide.

Provides access to the same configuration using the platform’s TCP/IP Configuration view. See “TCP/IP Configuration”.

Provides access to the same configuration using the platform’s License Manager view. See “License Manager”.

(JACE platforms only) Allows review of available serial ports on the host platform.

(All platforms except for JACE-8000 series) Provides configuration and status of the controller’s battery monitoring and AC power-fail shutdown routines. See “JACE power monitoring” for details.

Provides the Niagara interface to the NTP (Network Time Protocol) service or daemon of the platform’s OS (QNX or Windows), including several configuration parameters and a list specifying one or more NTP time servers. For details, see “About the NtpPlatformService”.

(JACE platforms only) Allows monitoring the service that automatically creates and manages static RAM buffers in the controller, allowing “battery-less” operation (if so configured), or usage of the SRAM along with an installed backup battery (if applicable). For details, refer to the document JACE Data Recovery Service (SRAM support).

(JACE platforms only) Optional platform service that provides a graphical diagram of communication ports and other features on the hosting JACE platform, including callouts to a table that explain the location, description (such as COM2), port type, and status/usage of each item. Requires installation of the modules platHwScan and a corresponding platHwScanType. Refer to the document JACE Hardware Scan Service.