GPRS Modem Configuration

The GPRS Modem Configuration view (shown here) is one of several NiagaraAX platform views for a QNX-based JACE. It its used to configure the (wireless) modem option card that may be installed in the host JACE controller.

An equivalent view, the GprsPlatformService, is added under the PlatformServices in the station running on the JACE. Note, this "Gprs Platform Service Plugin" (and GprsPlatformService) appears only if the controller actually has the GPRS modem option card installed--unlike the platform view. Everything in this section about the GPRS Modem Configuration view also applies to the Gprs Platform Service Plugin view.

 
NOTE: Although the GPRS Modem Configuration view appears if platform-connected to a JACE-4 or JACE-5 series controller, it does not apply to these platforms--in this case, you can safely ignore it.
 
Figure 27.   GPRS Modem Configuration view
Image
 
NOTE: Refer to the Engineering Notes document "GPRS modem option" for complete details, including a reference section covering all properties and fields in this platform GPRS Modem Configuration view (this also applies to the equivalent Gprs Platform Service Plugin view).