XL15C Setpoint

Description

The XL15C controller may have up to 40 setpoints. These are points internal to the XL15C controller for which a value and engineering unit may be set. They may be used as predefined Analog Inputs to SS loop, Control loop, Logic loop and math functions.

Setpoints may be used to provide analog inputs to Start/Stop Loops, Control Loops, Logic Loops and Math Functions. Setpoint values are constants that may be changed from an operator interface.

Purpose

To configure setpoint values.

Mode

Off-line or On-line.

Procedure

  1. Expand the XL15C folder in the bottom-left file explorer palette.
  2. Drag the SetPoint item onto the wiresheet on the right side of the screen.
  3. Right-click the box and select Config to display the SetPoint dialog.
  4. Select Engineering Units.
  5. Enter a value
  6. Click OK to save the settings or Cancel to revert to the last saved settings.

Fields

Name Definition
Engineering Units This list contains engineering units that may be assigned to the setpoint. Select the desired engineering unit from the list.
Value Enter the value of the setpoint in this field. The setpoint has a default value of 0 by default. The valid ranges for a setpoint are -99999 - +99999 with 5 digits maximum and a resolution of 0.0001.

Back