Wiring Assignment

Configuring Unit Ventilator Wiring Assignment

Use the Unit Ventilator Wiring Assignment page to set the outputs of a Unit Vent to actual physical outputs on a unit vent controller.

Purpose

Modify terminal assignments for configured outputs.

Mode

Off-line or On-line

Limits

Outputs must be configured using Unit Ventilator Controller Outputs page.

Procedure

  1. Click the Wiring Assignment button on the left pane to open the Wiring Assignment page.
  2. Enter information into available fields.
  3. Click Commit to save the settings or Reset to revert to the last saved settings.
  4. Click Next to display the Wiring Diagram page or Back to display the PID Configuration page.

Fields

Name Definition
Default Assignment This column displays the default assignments as the outputs are configured in the outputs page
Custom assignment Custom assignment – to change the assignments
Existing If the device is online, this shows the assignments as in the device. Else, it shows from the database

Back