VAV II Monitoring

Excel 10 VAV II Diagnostics

Use the RIO page to configure RIO inputs.

Purpose

This section describes the monitor screen of Excel 15C Plant Controller.

I/O summary

This tab displays about the various Input/Output configuration of the VAV2 controller.

Controller Mode

This tab is displays the different operating modes of operation of the VAV2 controller.

Flow Control

This tab displays the sizing of the VAV box and the flow parameters of VAV2.

Temperature Control

This tab displays the PID parameters and related inputs like DLC, heat or cold mode etc.

Controller Occupancy

This tab displays the present occupancy state of the controller. Also various configured occupancy status configured for the VAV2 controller.

Flow calibration

This tab displays the calibration details of the pressure sensor connected to the VAV system.

Flow Pickup table

This tab details about the characteristics of the sensor connected to the VAV2 controller.

Alarm/Diagnostics 1 and 2

This tab displays the alarms generated in the VAV2 controller and the various test mode state of the connected outputs.

Miscellaneous

This tab displays the various connected I/O of the VAV2 controller.

Back