VAV II Custom Wiring

Configuring Excel 10 VAV II Custom Wiring

Use the VAV Custom Wiring page to configure VAV custom wiring settings.

Purpose

To enable you to change the output pin configuration.

Mode

Configuration can be performed with the device On-line or Off-line.

Procedure

  1. Click the Custom Wiring button on the left pane to open the Custom Wiring page.
  2. You can choose to change the default assignment. Select Custom option in the Assignment Type list.
  3. Select Default to revert back to the default assignment.
  4. The number of outputs available for changing the configuration depends on the model type. For a W7751B Smart, only 4 output pins would be enabled.
  5. Click Commit to save the settings or Reset to revert to the last saved settings.
  6. Click Next to display the Wiring Diagram page or Back to display the Miscellaneous Parameters page.

Fields

Name Definition
Selected Outputs All configured outputs
Configured Outputs Terminal positions available for the Selected Outputs.
Default Assignments This list is filled with the default assignment as the user configures the outputs in the General page.
New Assignments This list is by default filled with the same options as Default Assignment. But, the user has an option to change the outputs.
Existing Assignments This list is filled with the outputs assignment in the controller.This list would show the actual assignment in the device if the device is online. If not, it would just show the values from the database.
Output Assignment Choose one of the following options:
  • Default
  • Custom - Choose this option if you want to over ride default assignments. This enables the New Assignment column. The number of output pins enabled depends on the Model Type selected.

Back