Schedules

Configuring Schedules

Use the Scheduling page to configure the schedule and schedule assignment to other controllers.

Mode

Off-line or On-line.

Procedure

  1. Click the Schedules button on the left pane to open the Schedules Configuration page.
  2. Enter information into available fields.
  3. Click Commit to save the settings or Reset to revert to the last saved settings.
  4. Click Next to display the Holidays page or Back to display the Equipment Control page.

Configuring Schedules

T7350 has one schedule. Use this screen to configure occupancy schedules for 8 days of the week, Monday through Sunday, and a holiday. Each day schedule has four events per day with one mode/time per event. Event 1 and Event 3 can be configured to be in occupied or standby or unconfigured modes. Event 2 and Event 4 can be configured to be in unoccupied or standby or unconfigured modes. Time for each event can be configured in the 24 hour format.

Complete the following procedure to configure a schedule:

  1. Click the day of the week or the Holiday button to select the day you want to configure the schedule.

  2. Select the appropriate options for Occ1, Unocc1, Occ2, and Unocc2. Notice that the cell turns green if occupied mode selected, white if unoccupied mode is selected, yellow if standby mode is selected and windows default background color if the unconfigured option is selected.

  3. Click the hours, minutes, and/or AM/PM and use the up/down arrow buttons to set the time.

  4. Click Apply Event.

Note

There cannot be more than two occupied or unoccupied or standby events per day. The wizard displays the error message when more than two standby events are selected and does not proceed further until any other mode is selected.

The scheduled events will execute in the order based on time of day.

Unconfiguring a Schedule

To unconfigure a schedule

To unconfigure a day schedule/event:

  1. Select the row/cell of the day whose schedule you want to unconfigure.

  2. Right click on the row/cell and select Delete. The schedule for that row/cell is unconfigured.

To copy a schedule from one day/event to other

To copy the schedule from one day/event to another, select the day/event and right click on the selection. Select Copy. Select the destination row/cell, right-click and select Paste.

Back