Holidays

Configuring Holiday Schedules

Use the Holidays page to configure the list of holidays that the selected T7350 will follow.

Mode

Off-line or On-line.

Procedure

  1. Click the Holidays button on the left pane to open the Holidays Configuration page.
  2. Enter information into available fields.
  3. Click Commit to save the settings or Reset to revert to the last saved settings.
  4. Click Back to display the Schedules page.

Configuring Holiday Schedules

A T7350 holiday is configured by a start date and duration. The start date can be a specific date or a relative day in a month. A holiday is not specific to a particular year, each holiday configuration is applicable for every year. T7350 supports a maximum of 10 holidays. A holiday follows a holiday schedule configured in the Scheduling page.

A holiday can be configured by either specifying a date or by specifying a day in a month.

Select Holiday

Select Weekday/Month for every year to configure a holiday by selecting a weekday in a month. Select the month from Select Holiday Month and the day from Start Holiday Start Day to specify the holiday start month and start day. The days are the relative days, such as, First Sunday, Fourth Monday and so on.

Select Date By

Select Specific Date for every year to configure a holiday by selecting a specific date for every year.

Select the month, start date, and duration of the holiday from the Select Holiday Start Month, Select Holiday Start Date, and uration fields respectively. The duration can be configured from 1 to 99 days.

Select one of the above options and click Add to add to the holiday list.

To remove a holiday from the Holiday List, select the holiday and click Sub.

Load U.S. Holidays

When this option is selected, pre-configured US holidays are loaded into the holiday list.

Following are the US holidays

  1. January 1

  2. Memorial Day

  3. July 4

  4. Labor Day

  5. Thanksgiving and Day After

  6. Christmas Eve and Day After

If there are more than four holidays already configured, the Load US holidays option will not load all the six holidays, since they would exceed the maximum holiday count. The first few US holidays are loaded until the total count has reached the maximum of 10 holidays. No duplicate holidays are allowed.

Back