Navigating to Unit Ventilator Pages

Complete the following procedure to navigate to the Unit Ventilator pages:

1. Select File > Open > Open Station.
2. Enter the IP address of the station in the field next to the IP list.
3. Enter User Name and Password.
4. Click OK.
5. In this step, you will create a Lon Network:

• Click Open Palette under the Palette on the left hand side of your screen.
• Add the Lon Network module.
• Drag and drop Lon Network under Drivers folder.

6. In this step, you will add Honeywell Lon devices:

• Click Open Palette under the Palette on the left hand side of your screen.
• Select the lonhoneywellAXWizards module.
• Double-click Lon Network or invoke the Lon Device Manager view of the Lon Network

7. Click New and select the device, in this case, it is Unit Ventilator.
8. Click OK.

Back