FCU Zone Control
Description
Configure the heating and cooling setpoints for the Occupied, Standby and Unoccupied
operating modes.
Purpose
Configure the heating and cooling setpoints for the Occupied, Standby and Unoccupied
operating modes.
Mode
Configuration can be performed with the wizard Off-line or On-line.
Procedure
- Click the Zone Control button on the left pane to open the Zone
Control Configuration page.
- Enter information into available fields.
- Click Commit to save the settings or Reset to revert
to the last saved settings.
- Click Next to display the Miscellaneous Configuration page
or Back to display the Switching Levels Configuration page.
Fields
Setpoints can range from 10 Deg.C to 35 Deg.C (50 Deg.F to 95 Deg.F).
| Name |
Definition |
| Temperature Setpoints |
Cooling/Heating
- Occupied: Setpoints during Occupied mode. Setpoints can range from 10
Deg.C to 35 Deg.C (50 Deg.F to 95 Deg.F).
- Standby: Setpoints during Standby mode. Setpoints can range from 10
Deg.C to 35 Deg.C (50 Deg.F to 95 Deg.F).
- Unoccupied: Setpoints during Unoccupied mode. Setpoints can range from
10 Deg.C to 35 Deg.C (50 Deg.F to 95 Deg.F).
|
Back