CVAHU Wiring Diagram

Description

Display the wiring diagram for the controller.

Purpose

Display the wiring diagram for the controller.

Mode

Configuration can be performed with the wizard Off-line or On-line.

Procedure

  1. Click the Wiring Diagram button on the left pane to open the Wiring Diagram Configuration page.
  2. Enter information into available fields.
  3. Click Commit to save the settings or Reset to revert to the last saved settings.
  4. Click Back to display the PID Configuration page.

Terminals

Terminal Connected to
1 Earth Ground
2 LED
3 Bypass
4 Sensor
5 AI Ground
6 Set Point
7 AI-1 Ohm
8 Ai Ground
9 DI-1
10-11 DI Ground
12 DI-2
13 Not Used
14-15 Lon Works Bus
16  
17-20 Not Used
21 VAC Com
22 VAC
23 Rh
24 Rc
25-26 Network Do
27 G
28 Y2
29 Y1
30 W2
31 W1

Note: Fields appearing grayed out indicate those fields that change based on the Controller Type selected on the Outputs Configuration page.

Back